any-CUT I laser die-cutter
The digital laser die-cutter any-CUT I
Features & Benefits
5,000 labels can be cut within one hour with no retooling.
The combination of the latest laser technology and vision system guarantees the quality of labels.
Time and costs can be reduced by performance that serves a triple purpose.
You will become an expert with only a short-term training.
Production is possible without concerns about space.
It can be installed in a small space and cutting can be done whenever necessary.
Cutting and marking can be performed simultaneously.
Full and half cuts can be performed simultaneously.
Various media in terms of thickness and type are supported.
Long labels can also be cut at one time.
Labels with highly complex images can also be cut speedily.
Concerns over consumable costs such as the replacement of knife edges are no longer necessary.
Max web width
- Medium rolls with a maximum width of 215mm can be used.
Max web speed : 18m/m
- Fast label die cutting is possible.
Max roll diameter
- Media rolls with a maximum diameter of 300mm can be used.
Laser spot size
- Elaborate work is enabled with a small laser beam.
Life of laser
- No costs are incurred on consumables as the product can be used daily 3 hours for 10 years.
Cutting area : width 200mm x 1200mm
- Very long labels can also be cut at once.
Supporting “on the fly” (Option)
- Label cutting can be done faster.
Cooling : air-cooled
- As no separate cooling device is necessary, the product can be used even in small spaces.
Laser Source(10.57 – 10.63 um)
- The die cutting of papers and film are enabled by using a CO2 laser source.
- Additional functions are provided, including full and half cuts, sheet die cutting, marking, QR codes, barcodes, and numbering.
Compact size : D1620 x W630 x H503 mm / 190 kg
- It can also be used in small spaces or offices.
Power supply : 110-220v
- Brush – Remove residual dust generated during cutting process
- Cleaning tissue – Clean skin head and sensors
Laser cutting system is contactless type cutting system using laser beam. Unlike other light, due to low scattering rate and high linearity, laser can concentrate large energy on small area. This concentrated energy is adjusted to desired location and cuts label media.
It is 20 times faster than contact type analogue cutter. Difference of speed is even larger when cutting label with complicated shape.
Contact us at firstname.lastname@example.org for more detailed information.
One of benefits of laser cutting is to get equally high quality of output from repeated works. When using knife, abrasion of knife changes quality of cutting, but laser guarantees consistency of power for 10,000 hours, which lead to equal quality for label. In addition, Any-cut provide even more accurate cutting by calibrating cutting location via vacuum pad, sensor, and vision system that minimize moving of paper.
Any-cut requires fume extractor to eliminate smoke during cutting and air compressor to remove dust resided on paper. It is important to have right peripherals for work environment in order to maintain Any-cut in the best condition. Therefore, it is highly recommended to purchase genuine products from us in your local area.
Any-cut supports various types of papers including papers which can be used in Any-001 (Art paper, PP, and PET). However, papers containing metal element cannot be used in Any-cut.
Dedicated SW is provided as plug-in for Illustrator. It provides various cutting, marking and hatching functions. For instance, you can mark bar-code, QR code and serial number on label.
You can set up different cutting conditions for each layer using Any-cut SW. It enables various cutting operation by adjusting strength and speed of laser.
It can cut up to 200mm*1200mm size.
Up to 215mm wide roll can be mounted.
Max cutting speed is 18m/m. It is recommended that you measure speed in hand by cutting samples as the result may vary depending on a type of paper, and shape of label.
We guarantee 10,000 hours of lifespan for laser which means it can be used for 7 years by 6 hour operation per day.
Max diameter of roll is supported up to 30cm; up to 10 kg of roll can be mounted.
Brush to remove dust is only a consumable required for Any-cut. It might be good to have cleaning tissue to clean lenses
Two days for user training and three days for reseller training.
Apart from laser cutting, Any-cut can do laminating and removing scrap paper at the same time, delivering the best result for user.
Any-cut is designed for high standard of user safety and stop working when user is exposed to hazard of laser beam. It means Any-cut is 100% safe for you and your co-workers.
Any-cut is 1620mm(L)*630mm(W)*503mm(H) big and the first laser cutter which can be used by using desktop PC in small office.